PET strap
Embossed polyester strap in 12–19 mm widths, on request.
- 3
- widths
- 12–19
- mm
- By the
- roll
Sheet metal clips
0.50 mm steel clips for joining PET and PP strap.
- 3
- sizes
- 12–19
- mm
- 0.50
- mm steel
Availability, specifications and lead time on request. Delivery terms are agreed with your quotation.
Product details
Overview
Open steel clips in nominal strap widths of 12, 16 and 19 mm. The supplied catalogue specifies 0.50 mm sheet. PET or PP strap, clip geometry and the crimping tool must be checked as one system before ordering.
- 0.50 mm steel sheet
- For PET and PP strap
- 12, 16 and 19 mm
- 500 to 1,000 clips per carton
Pairs with
Use with green PET strap in the same width. One clip per joint.
Specifications
| Strap widths | 12, 16, and 19 mm (1/2–3/4 in) |
|---|---|
| Sheet thickness | 0.50 mm |
| Material | Steel sheet |
| Finish | On request |
| Part numbers | YK-SC-12, YK-SC-16, YK-SC-19 |
| Pcs/carton | 500, 800, or 1,000 |
| Net weight/carton | 3 kg |
| Carton size | On request |
| Cartons/pallet | 300 |
| Compatible strap | PET / PP subject to clip, strap and tool validation |
| Strength | On request |
Sizes and carton data
| Part no. | Width | Wire Ø / thickness | Pcs / carton | Net kg | Carton (cm) | Cartons / pallet | Quantity |
|---|---|---|---|---|---|---|---|
| YK-SC-12 · On request | 12 mm · 1/2 in | 0.50 mm | 1,000 | 3 | On request | 300 | |
| YK-SC-16 · On request | 16 mm · 5/8 in | 0.50 mm | 800 | 3 | On request | 300 | |
| YK-SC-19 · On request | 19 mm · 3/4 in | 0.50 mm | 500 | 3 | On request | 300 |
Typical values per carton. Application examples are starting points, not load ratings. Match strap grade, accessory geometry and finish, tool and load conditions, then validate complete-joint performance before use. Availability is on request. Finish: on request. A matched crimping tool is needed to close the joint.
Strap width is the nominal width of the strap this product fits, not the product’s outside size.
Applications
The supplied catalogue specifies open 0.50 mm steel clips for matched PET and PP strapping systems. Confirm strap grade, clip profile and crimping-tool suitability before ordering.
Typical uses
- Cartons and light pallets
- 12 and 16 mm clips with 12 and 16 mm PET strap.
- Heavy pallets with PET strap
- 16 and 19 mm clips with 16 and 19 mm PET strap.
- Bundles closed with a crimping tool
- For a validated PET or PP strap, clip and tool combination.
Choosing the size
12 mm clips for 12 mm strap, 16 mm for 16 mm, 19 mm for 19 mm. Packed 1,000, 800 and 500 clips per carton respectively.
Industries that use this family
Where this family is usually part of the system.
Downloads
Technical note. Published specifications are catalogue references. Exact dimensions, system suitability and availability are reviewed with your quotation.
Sheet metal clip
How it is used
Overlap
Overlap the two strap ends inside the clip.
Tension
Pull the strap tight with a tensioner.
Crimp
Close the clip with a crimping tool to lock the joint.
Before you order
Put the specification in context.
Read the practical questions behind this component, then bring your strap, tool and application details to the enquiry.
Applications · 4 min read
A receiving checklist for buckles, clips, seals and strap
Check an incoming packaging order against the agreed specification: identity, quantity, dimensions, condition, documents and controlled release for use.
Procurement · 4 min read
Distributor guide: identify strapping components before a repeat order
Build a distributor product record for buckles, clips and seals, linking catalogue identity, packing units, supplier references and lot enquiries.
Procurement · 4 min read
Buying packaging components internationally: the first-order plan
A practical first-order plan for international buyers: specify the component, review samples, compare quotation scope and agree delivery responsibilities.